HPE FlexFabric 5940 Series Configuration Manual page 77

Step
Configure the
2.
SNMP access
right.
To control SNMPv3 access:
Step
Enter system
1.
view.
Create an
2.
SNMPv3 group,
specifying ACLs
for the group.
Command
•
(Method 1.) Create an SNMP community and specify
ACLs for the community:
In VACM mode:
snmp-agent community { read | write } [ simple |
cipher ] community-name [ mib-view view-name ]
[ acl { ipv4-acl-number | name ipv4-acl-name } | acl
ipv6 { ipv6-acl-number | name ipv6-acl-name } ] *
In RBAC mode:
snmp-agent community [ simple | cipher ]
community-name user-role role-name [ acl
{ ipv4-acl-number | name ipv4-acl-name } | acl ipv6
{ ipv6-acl-number | name ipv6-acl-name } ] *
•
(Method 2.) Create an SNMPv1/v2c group and add a
user to the group, specifying ACLs for the group and
user:
a. snmp-agent group { v1 | v2c } group-name
[ read-view view-name ] [ write-view view-name ]
[ notify-view view-name ] [ acl { ipv4-acl-number |
name ipv4-acl-name } | acl ipv6 { ipv6-acl-number |
name ipv6-acl-name } ] *
b. snmp-agent usm-user { v1 | v2c } user-name
group-name [ acl { ipv4-acl-number | name
ipv4-acl-name } | acl ipv6 { ipv6-acl-number | name
ipv6-acl-name } ] *
Command
system-view
In non-FIPS mode:
snmp-agent group v3 group-name [ authentication |
privacy ] [ read-view view-name ] [ write-view view-name ]
[ notify-view view-name ] [ acl { ipv4-acl-number | name
ipv4-acl-name } | acl ipv6 { ipv6-acl-number | name
ipv6-acl-name } ] *
In FIPS mode:
snmp-agent group v3 group-name { authentication |
privacy } [ read-view view-name ] [ write-view view-name ]
[ notify-view view-name ] [ acl { ipv4-acl-number | name
ipv4-acl-name } | acl ipv6 { ipv6-acl-number | name
ipv6-acl-name } ] *
69
Remarks
For more
information about
SNMP, see
Network
Management and
Monitoring
Configuration
Guide.
Remarks
N/A
N/A