HPE FlexFabric 5940 Series Configuration Manual page 66

Step
Create local key
2.
pairs.
Enable the Stelnet
3.
server.
(Optional.) Create an
4.
SSH user and
specify the
authentication mode.
Enter VTY line view
5.
or class view.
Enable scheme
6.
authentication.
Command
•
In non-FIPS mode:
public-key local create
{ dsa | ecdsa
[ secp192r1 | secp256r1
| secp384r1 ] | rsa }
[ name key-name ]
•
In FIPS mode:
public-key local create
{ dsa | ecdsa
[ secp256r1 |
secp384r1 ] | rsa }
[ name key-name ]
ssh server enable
•
In non-FIPS mode:
ssh user username
service-type stelnet
authentication-type
{ password | { any |
password-publickey |
publickey } assign
{ pki-domain
domain-name |
publickey keyname } }
•
In FIPS mode:
ssh user username
service-type stelnet
authentication-type
{ password |
password-publickey
assign { pki-domain
domain-name |
publickey keyname } }
•
Enter VTY line view:
line vty first-number
[ last-number ]
•
Enter VTY line class
view:
line class vty
authentication-mode
scheme
58
Remarks
By default, no local key pairs are created.
By default, the Stelnet server is disabled.
By default, no SSH user is configured on the
device.
A setting in user line view applies only to the
user line. A setting in user line class view
applies to all user lines of the class.
A non-default setting in either view takes
precedence over a default setting in the other
view. A non-default setting in user line view
takes precedence over a non-default setting
in user line class view.
A setting in user line class view does not take
effect for current online users. It takes effect
only for new login users.
In non-FIPS mode, password authentication
is enabled for VTY lines by default.
In FIPS mode, scheme authentication is
enabled for VTY lines by default.
In VTY line view, this command is associated
with the protocol inbound command. If you
specify a non-default value for one of the two
commands, the other command uses the
default setting, regardless of the setting in
VTY line class view.