Displaying And Maintaining Configuration Files - HPE FlexFabric 5940 Series Configuration Manual

Perform the following task in user view:
Task
Delete a next-startup
configuration file.

Displaying and maintaining configuration files

Execute display commands in any view and reset commands in user view.
Task
Display configuration archive
information.
Display the running configuration.
Display the differences that the running
configuration has as compared with the
next-startup configuration.
Display the factory defaults.
Display the differences between
configurations.
Display the contents of the configuration
file for the next system startup.
Display the names of the configuration
files for this startup and the next startup.
Display the valid configuration in the
current view.
Delete a next-startup configuration file.
Command
reset saved-configuration
[ backup | main ]
Command
display archive configuration
display current-configuration [ [ configuration
[ module-name ] | interface [ interface-type
[ interface-number ] ] ] [ all ] | slot slot-number ]
display current-configuration diff
display default-configuration
•
display diff configfile file-name-s { configfile file-name-d
| current-configuration | startup-configuration }
•
display diff current-configuration { configfile
file-name-d | startup-configuration }
•
display diff startup-configuration { configfile
file-name-d | current-configuration }
display saved-configuration
display startup
display this
reset saved-configuration [ backup | main ]
108
Remarks
If you do not specify the backup
or main keyword, this command
deletes the main next-startup
configuration file.