ProCurve 2626 Management And Configuration Manual page 64

Using the Command Line Interface (CLI)
Using the CLI
The remaining commands in the listing are Manager,
Operator, and context commands.
Figure 4-9. Context-Specific Commands Affecting Port Context
4-14
ProCurve(eth-C5-C8)#?
ProCurve(eth-C5-C8)#?
Lists the commands you
can use in the port or static
trunk context, plus the
Manager, Operator, and
context commands you can
execute at this level.
In the port context, the first block of commands in the "?"
listing show the context-specific commands that will affect
only ports C3-C6.