ProCurve 2626 Management And Configuration Manual page 372

Troubleshooting
Unusual Network Activity
Figure C-2. Example of a Port Remaining Open After Being Configured with "Control Unauthorized"
C-12
unauthorized. 802.1X is not active on the switch. After you execute aaa port-
access authenticator active, all ports configured with control unauthorized
should be listed as Closed.
RADIUS server fails to respond to a request for service, even though
the server's IP address is correctly configured in the switch. Use
show radius to verify that the encryption key (RADIUS secret key) the switch
is using is correct for the server being contacted. If the switch has only a global
key configured, then it either must match the server key or you must configure
a server-specific key. If the switch already has a server-specific key assigned
to the server's IP address, then it overrides the global key and must match the
server key.
Port A9 shows an "Open" status even
though Access Contro is set to l
Unauthorized (Force Auth). Th
because the port-access
authenticator has not yet been
activated.
is is