Menu: Viewing And Configuring Timep - ProCurve 2626 Management And Configuration Manual

Figure 9-9. The System Information Screen (Default Values)

Menu: Viewing and Configuring TimeP

To View, Enable, and Modify the TimeP Protocol:
1. From the Main Menu, select:
2. Switch Configuration...
1. System Information
2. Press (for ). The cursor moves to the
[E] Edit
3. Use [v] to move the cursor to the
4. If is not already selected, use the Space bar to select
TIMEP
press [v] once to display and move to the
5. Do one of the following:
• Use the Space bar to select the
the cursor to the
TimeP: Viewing, Selecting, and Configuring
Ti me Protocol Selection Parameter
– TIMEP (the default)
– SNTP
– None
Time Sync Method
TimeP Mode
mode, then press [v] to move
DHCP
field, and go to step 6.
Poll Interval
Time Protocols
field.
System Name
field.
, then
TIMEP
field.
9-15