ProCurve 2626 Management And Configuration Manual page 145

Switch 2600 series switch 2600-pwr series switch 2800 series switch 4100 series switch 6108
Hide thumbs Also See for 2626:
Table of Contents

Advertisement

Figure 8-9. Configuration File in TFTP Server, with Dedicated IP Addressing Instead of DHCP/Bootp
IP Preserve: Retaining VLAN-1 IP Addressing Across Configuration File Downloads
To summarize the IP Preserve effect on IP addressing:
If the switch received its most recent VLAN 1 IP addressing from a DHCP/
Bootp server, it ignores the IP Preserve command when it downloads the
configuration file, and implements whatever IP addressing instructions
are in the configuration file.
If the switch did not receive its most recent VLAN 1 IP addressing from a
DHCP/Bootp server, it retains its current IP addressing when it downloads
the configuration file.
The content of the downloaded configuration file determines the IP
addresses and subnet masks for other VLANs.
Configuring IP Addressing
Because switch 4 (figure 8-7) received
i
ts most recent IP addressing from a
DHCP/Bootp server, the switch
ignores the ip preserve command and
implements the IP addressing
incl
uded in this file.
8-19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents