Menu: Configuring Port And Static Trunk Monitoring - ProCurve 2626 Management And Configuration Manual

Menu: Configuring Port and Static Trunk Monitoring

This procedure describes configuring the switch for monitoring when moni­
toring is disabled. (If monitoring has already been enabled, the screens will
appear differently than shown in this procedure.)
1. From the Console Main Menu, Select:
2. Switch Configuration...
3. Network Monitoring Port
Figure B-19. The Default Network Monitoring Configuration Screen
2. In the Actions menu, press
3. If monitoring is currently disabled (the default) then enable it by pressing
the Space bar (or
4. Press the down arrow key to display a screen similar to the following and
move the cursor to the Monitoring Port parameter.
Monitoring and Analyzing Switch Operation
Port and Static Trunk Monitoring Features
[E] (for Edit).
) to select Yes.
[Y]
Enable monitor ing
by setting this
parameter to "Yes".
B-25