Time Protocols
SNTP: Viewing, Selecting, and Configuring
Figure 9-1. The System Information Screen (Default Values)
9-6
2. Press
(for
). The cursor moves to the
[E]
Edit
3. Use [v] to move the cursor to the
4. Use the Space bar to select
to the
field.
SNTP Mode
5. Do one of the following:
•
Use the Space bar to select the
move the cursor to the
Broadcast mode details, see "SNTP Operating Modes" on
page 9-2.)
•
Use the Space bar to select the
following:
i. Press [>] to move the cursor to the
Ti
me Protocol Selection Parameter
– TIMEP
– SNTP
–
None
System Name
Time Sync Method
, then press [v] once to display and move
SNTP
mode, then press [v] to
Broadcast
field, and go to step 6. (For
Poll Interval
mode, then do the
Unicast
Server Address
field.
field.
field.