Daylight Saving Time - TP-Link TL-SL3428 User Manual

Pqvg<"
1. The system time will be restored to the default when the switch is restarted and you need to
reconfigure the system time of the switch.
2. When Get Time from NTP Server is selected and no time server is configured, the switch will
get time from the time server of the Internet if it has connected to the Internet.
60306"Fc{nkijv"Ucxkpi"Vkog"
Here you can configure the Daylight Saving Time of the switch.
Choose the menu U{uvgo→U{uvgo"Kphq→Fc{nkijv"Ucxkpi"Vkog to load the following page.
The following entries are displayed on this screen:
FUV"Eqphki"
"
FUV"Uvcvwu<"
Rtgfghkpgf"Oqfg<"
Tgewttkpi"Oqfg<"
Figure 4-6 Daylight Saving Time
Enable or Disable DST.
Select a predefined DST configuration:
 USA: Second Sunday in March, 02:00 ~ First Sunday in
November, 02:00.
 Australia: First Sunday in October, 02:00 ~ First Sunday in
April, 03:00.
Europe: Last Sunday in March, 01:00 ~ Last Sunday in

October, 01:00.
 New Zealand: Last Sunday in September, 02:00 ~ First
Sunday in April, 03:00.
Specify the DST configuration in recurring mode. This
configuration is recurring in use:
 Offset: Specify the time adding in minutes when Daylight
Saving Time comes.
 Start/End Time: Select starting time and ending time of

Daylight Saving Time.

15