LG PBACNBTR0 Installation Manual page 6

SAFETY INSTRUCTIONS
CAUTION
Wear protective gloves when handling equipment.
Sharp edges may cause personal injury.
Note:
The information contained in this manual is intended for use by an industry-qualified, experienced, trained electrician familiar
with local, national, and regional codes and who is equipped with the proper tools and test instruments.
Failure to carefully read and follow all instructions in this manual can result in equipment malfunction or property damage.
Disconnect power before installing or servicing the unit.
There is risk of equipment damage or degraded performance.
MultiSITE Communications Manager is for use with select LG air conditioning systems only.
with any other type of system.
There is risk of equipment damage or degraded performance.
Clean up the site after all procedures are finished, and check that no metal scraps, screws, or bits of wiring have been left
inside or surrounding the controller or indoor units.
Do not allow water, dirt, or animals to enter the controller.
There is risk of unit failure or degraded performance.
Do not spill water or other liquid on the inside of the controller.
immersed in water or other liquid, contact your local authorized LG distributor for support.
There is risk of unit failure or degraded performance.
Remove all power to controller before attaching (plug in) or detaching (unplug) any option module.
There is risk of possible equipment damage.
Do not remove the controller's cover.
No configurable or user-serviceable items (such as jumpers or a battery) require cover removal. All items are accessible as switches and connectors
on the unit's top, bottom, and side, or behind the unit's front access door or microSD card shutter.
This device is only intended for use as a monitoring and control device.
There is risk of data loss or equipment damage.
Before removing or inserting the microSD card, disconnect all power to the controller and use static discharge precautions.
There is risk of equipment damage.
The MultiSITE Communications Manager controller is not compatible with a Power-Over-Ethernet (POE) network.
connect the controller on a network segment which carries power.
The unit may fail.
6
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Do not attempt to use this unit
Do not drop the controller into water. If the unit is
Do not use it for any other purpose.
Do not