Mounting Preparation; Inserting Or Removing The Microsd Card - LG PBACNBTR0 Installation Manual

Inserting or Removing the MicroSD Card

Before mounting a new controller, you must insert the included microSD flash memory card. The microSD card includes the operating system
as well as the LG user interface. This card must be installed for the MultiSITE Communications Manager controller to function.
Before inserting or removing the microSD card
• The controller must be unmounted from any DIN rail or screw tab mounting, as accessing the card uses space behind the mounting base.
• Disconnect all power to the controller and use static discharge precautions.
Note:
The microprocessors and associated circuitry within the controller are sensitive to static discharge. Work in a static-free area. Discharge any
static electricity you may have accumulated. Discharge static electricity by touching a known, securely grounded object. Disconnect all power
to the controller and use these precautions before removing or inserting the microSD card. Otherwise, equipment damage is likely to occur.
1 = Access shutter for microSD card (slide to open or close).
2 = Card carrier inside controller.
3 = MicroSD card to insert or remove from card carrier.
Figure 3: MicroSD card location in controller.
1
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.

MOUNTING PREPARATION

2
3
11