LG PBACNBTR0 Installation Manual page 5

Multisite communications manager

Table of Contents

WARNING

The information contained in this manual is intended for use by an industry-qualified, experienced, trained electrician familiar

with local, national, and regional codes and who is equipped with the proper tools and test instruments.

Failure to carefully read and follow all instructions in this manual can result in personal injury or death.

All electric work must be performed by a licensed electrician and conform to local building codes or, in the absence of

local codes, with the National Electrical Code, and the instructions given in this manual.

If the power source capacity is inadequate or the electric work is not performed properly, it may result in fire, electric shock, physical injury or death.

Use copper conductors only. Refer to local, state, and federal codes, and use power wires of sufficient current capacity and

rating.

Wires that are too small may generate heat, cause a fire and physical injury or death.

Before making power terminations during earth grounding, de-energize the 24V power source.

completing all other mounting and wiring.

There is risk of electric shock and physical injury or death.

Install in a controlled environment relatively free of contaminants.

There is risk of electric shock and physical injury or death.

Secure all field wiring connections with appropriate wire strain relief.

Improperly securing wires will create undue stress on equipment power lugs. Inadequate connections may generate heat, cause a fire and physical

injury or death.

Ensure the system is connected to a dedicated power source that provides adequate power.

If the power source capacity is inadequate or the electric work is not performed properly, it may result in fire, electric shock, physical injury or death.

Do not change the settings of the protection devices.

If the pressure switch, thermal switch, or other protection device is shorted and forced to operate improperly, or parts other than those specified by

LG are used, there is risk of fire, electric shock, explosion, and physical injury or death.

Properly tighten all power connections.

Loose wiring may overheat at connection points, causing a fire, physical injury or death.

Dispose of any packing materials safely.

• Packing materials, such as nails and other metal or wooden parts may cause puncture wounds or other injuries.

• Tear apart and throw away plastic packaging bags so that children may not play with them and risk suffocation and death.

Do not install the MultiSITE Communications Manager unit if it will be exposed to rain or other precipitation.

install the unit in a location exposed to open flame or extreme heat.

There is risk of fire, electric shock, physical injury, and/or death.

Due to our policy of continuous product innovation, some specifications may change without notification.

SAFETY INSTRUCTIONS

Do not touch the unit with wet hands.