Fastening The Rail To The Front Of The Rack; Fastening The Rail To The Rear Mounting Bracket; Installing The Filler Panel - HP AK241A - StorageWorks 8Gb Simple SAN Connection Installation And Reference Manual

5. Fasten each rail flange to the front of the rack using two M6 machine screws
Figure 10

Fastening the rail to the front of the rack

6. Fasten each slotted-rail end to the rear mounting bracket using a flat washer and a 1/4-20 hex nut
(Figure 1 1).
Figure 1 1

Fastening the rail to the rear mounting bracket

7. Optional: Fasten the filler panel to the rear mounting brackets with two M6 machine screws
Figure 12

Installing the filler panel

34
(Figure 10).
(Figure 12).