Table of Contents
Advertisement
Pull upwards to remove
i210-411
www.powercommander.com
Ground wire
PCIII harness
Stock connectors
8
Route the ground wire from
the PCIII under the frame and
attach to the negative side of
the battery (Fig. D).
9
Locate the stock throttle body
connector under the fuel tank
(Fig. E).
10
Pull straight upwards on this
connector to remove from its
frame post.
11
Pull the stock connector
underneath the frame.
12
Unplug the stock connector
(Fig. F).
2003 Kawasaki Z1000 - PCIII USB - 3
Advertisement
Table of Contents
Need help?
Do you have a question about the power commander III and is the answer not in the manual?
Questions and answers