Operation; Connections And Control Devices - ESAB Tig 150i Instruction Manual

GB
6

OPERATION

General safety regulations for the handling of the equipment can be found on
page 3. Read through before you start using the equipment!
6.1

Connections and control devices

Make sure that the welding power source is connected to the correct supply voltage
and that it is protected by the correct fuse rating.
1 Mains switch
2 Connection (gas bottle connector)
3 Mains cable
4 Connection for the TIG torch
5 TIG torch gas connection
7 and 8 are used for welding current supply and return cable connection during MMA
welding
bt26d2e
6 TIG torch connection (--)
7 Connection for return cable (--) MMA
8 Welding cable connection (+) MMA
Connection for return cable (+) TIG
9 Control panel (see 6.2)
- - 8 - -