Huawei Quidway S9300 Configuration Manual page 146

6 IP Source Trail Configuration
Procedure
Step 1 Configure IP source trail based on the destination IP address.
<Quidway> system-view
[Quidway] ip source-trail ip-address 10.0.0.3
Step 2 Verify the configuration.
Run the display ip source-trail ip-address ip-address command, and you can view the trace
result of 10.0.0.3.
<Quidway> display ip source-trail ip-address 10.0.0.3
Destination Address: 10.0.0.3
----End
Configuration Files
#
sysname Quidway
#
ip source-trail ip-address 10.0.0.3
#
return
6-6
SrcAddr SrcIF
----------------------------------------------------------------------
192.10.1.11 GE1/0/2
101.1.1.17 GE2/0/1
101.1.1.5 GE2/0/1
198.19.1.9 GE4/0/1
198.19.1.3 GE4/0/1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Bytes Pkts
4.825M 107.420K
4.433M 98.708K
2.868M 63.861K
2.215M 49.339K
1001.083K 21.762K
Configuration Guide - Security
Bits/s Pkts/s
5.223M 14.535K
5.223M 14.537K
5.227M 14.546K
5.230M 14.553K
5.248M 14.605K
Issue 01 (2009-07-28)