Optional) Disabling Urpf For The Specified Traffic; Checking The Configuration - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
----End

7.3.4 (Optional) Disabling URPF for the Specified Traffic

Context
After the URPF function is enabled on an interface, the S9300 performs the URPF check on all
traffic passing through the interface. To prevent the packets of a certain type from being
discarded, you can disable the URPF check for these packets. For example, if the S9300 is
configured to trust all the packets from a certain server, the S9300 does not check these packets.
To disable the URPF function, you need to run commands in the traffic behavior view and
associate the traffic behavior and a traffic classifier with a traffic policy.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
traffic behavior behavior-name
A traffic behavior is created and the traffic behavior view is displayed.
Step 3 Run:
ip urpf disable
The URPF function is disabled.
By default, the RUPF function is enabled in a traffic behavior.
After the URPF function is enabled on an interface, the S9300 performs the URPF check on all
traffic passing through the interface. If you need to disable the URPF function, you can run
commands in the traffic behavior view and associate the traffic behavior and a traffic classifier
with a traffic policy. When the traffic policy is applied globally or applied to a board, an interface,
or a VLAN, the S9300 does not perform URPF check on the traffic that match the traffic classifier
rules.
For the configuration procedures of traffic classifier and traffic policy, see
Configuration
----End

7.3.5 Checking the Configuration

Issue 01 (2009-07-28)
Packets pass URPF check and are forwarded in URPF loose check mode regardless of
–
whether the outgoing interface of a default route is the same as the incoming interface of
the packets.
NOTE
Only the S9300 installed with an EA/EC/ED LPU supports this function.
in the Quidway S9300 Terabit Routing Switch Configuration Guide - QoS.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 URPF Configuration
Class-based QoS
7-5