Fluke 9100A Operation Manual page 26

Press the RIGHT ARROW key.
4.
moves to the next field (POD) and you see a new set
of softkeys for that field. The MORE SOFTKEYS
light comes on, reminding you that there are more
REPORT POWER SUPPLY FAILURE ON
Press the F2 softkey,
5 .
USERDISK.
If your system is a 9100A, the first line should read,
"SETUP USERDISK HDR".
If your system is a 9105A, the first line should look
like the display shown below:
The cursor
which is below the
DR2
I