4.
Press the RIGHT ARROW key. The cursor
moves to the next field (POD) and you see a new set
of softkeys for that field. The MORE SOFTKEYS
light comes on, reminding you that there are more
SETUP II REPORT POWER SUPPLY FAILURE ON
5 .
P r e s s t h e F 2 softkey, which is below the
USERDISK.
If your system is a 9100A, the first line should read,
"SETUP USERDISK HDR".
If your system is a 9105A, the first line should look
like the display shown below:
D
R
2