Uc Ir/Airstream Ir Control - ADJ MEGA HEX PAR User Instructions

Mega HEX Par ADJ UC IR/ Airstream IR Control
The UC IR infrared remote gives you control of various functions (See below). To control the fixture
you must aim the remote at the front of the fixture and be no more than 30 feet away. To use the ADJ
UC IR you must first activate the fixtures infrared sensor, to activate the sensor please see the
instructions on page 11.
The Airstream IR remote transmitter plugs into the headphone jack of your iOS phone or tablet. To
control your IR fixture you must raise the volume to the maximum on your iOS phone or tablet and
aim the transmitter at the fixture sensor and be no more than 15 feet away. After you have purchased
the Airstream IR transmitters, the app is a free download from the app store for your iOS phone or
tablet. The app comes with 3 pages of control depending on the fixture you are using. Please see
below for IR functions including the corresponding app page.
Works with App page 1
STAND BY - Pressing this button will blackout the fixture. Press the button again to return to the ini-
tial state.
FULL ON - Press this button down to fully light up the unit. Press this button again to return the unit
to its last mode of operation.
FADE/GOBO - This button activates fade mode.
"DIMMER +" and "DIMMER -" - Use these buttons to adjust the output intensity.
STROBE - Press this button to activate strobing. Use buttons 1-4 to adjust the strobe speed. "1"
being the slowest, "4" being the fastest. Press this button again to stop strobing.
COLOR - Press this button to activate color mode. Use buttons 1-9 to find your desired color.
1-9 - Use buttons 1-9 to select your desired color when color mode is active or your desired program
when show mode is active. Use buttons 1-4 to select you desired strobe rate when strobing is active.
SOUND ON & OFF - Use the buttons to activate and deactivate sound active mode.
SHOW 0 - Press this button to activate show mode. Use buttons 1-9 to select your desired show.
Press this button twice for show 10. Press button 1 twice for show 11.
ADJ Products, LLC - www.adj.com - Mega HEX Par User Manual Page 13