Adj Uc Laser Ir/Airstream Ir Control - ADJ StarTec Series User Instructions

Contour
The ADJ UC Laser IR infrared remote gives you control of various functions. To control the Contour
you must aim the remote at the front of the fixture and be no more than 30 feet away.
The ADJ Airstream IR remote transmitter (not included) plugs into the headphone jack of your iOS
phone or tablet. To control your IR fixture you must raise the volume to the maximum on your iOS
phone or tablet and aim the transmitter at the fixture sensor and be no more than 15 feet away. After
you have purchased the Airstream IR transmitters, the app is a free download from the app store for
your iOS phone or tablet. The app comes with 3 pages of control depending on the fixture you are
using. Please see below for IR functions including the corresponding app page.
Works with App page 3
STAND BY BUTTON
Press this button to blackout the fixture. Press the button again to return to the initial state.
PATTERN -, & + BUTTONS
Press these buttons to scroll through the 15 shows.
SPEED, SPEED -, & + BUTTONS
Use these buttons to increase and decrease the running speed of an active show. Press the "Speed"
button to automatically set the running speed to 50% speed.
RGB, R+G, G+B, B+R, R+G+B BUTTONS
Press these buttons to activate these colors or color mixtures.
RANDOM BUTTON
This button is invalid for this fixture.
STROBE BUTTON
This button is invalid for this fixture.
SOUND BUTTON
Activate sound activity.
AUTO FAST & SLOW BUTTONS
These buttons activate Auto Show mode as well as set either a fast running speed or slow running
speed. The "Speed -" & "Speed +" buttons additional speed control.
ADJ Products, LLC - www.adj.com - Contour User Manual Page 14
STAND BY
PATTERN- PATTERN PATTERN+
SPEED- SPEED SPEED+
Pattern -
R G B
R+G G+B B+R
R+G+B
RANDOM STROBE
SOUND AUTO FAST AUTO SLOW
ADJ UC Laser IR/ Airstream IR Control
BUTTONS
Pattern
Speed - Speed
R G
R+G G+B
R+G+B Random
Sound Auto Fast
Stand By
Pattern +
Speed +
B
B+R
Strobe
Auto Slow