General Purpose I/O - Fibocom G610 Hardware User Manual

3.11.5 General Purpose I/O

The G610 incorporates 8 general purpose IO signals for the user application. Each GPIO signal
may be configured and controlled by AT command. These signals may be used to control or set
external application circuits, or to receive indications from the external application.
G610 Pin#
35
34
33
32
37
36
31
54
G610 GPRS Module Hardware User Manual
G610 Signal name
GPIO01
GPIO02
GPIO03
GPIO04
SCL/GPIO18
SDA/GPIO19
GPIO07
GPIO36
Description
Bit1
Bit2
Bit3
Bit4
Bit5
Bit6
Bit7
Bit8
Page 35 of 47