3 Hardware Interface Description
The following paragraphs describe in details the hardware requirements for properly interfacing
and operating the G610 module.
3.1 Architecture Overview
The G610 consists of the following blocks:
3.1.1 Digital Block
Micro-controller Unit (MCU) for system and application code execution.
Digital Signal Processor (DSP) for voice and data processing.
Serial communications interfaces.
SPI for trace debug or PCM audio (option)
SIM card
General purpose IO signals.
Real Time Clock (RTC) subsystem.
3.1.2 Analog Block
Power management inside.
Internal regulators
Analog audio interface management.
General purpose dedicated A/D signals.
G610 GPRS Module Hardware User Manual
Page 11 of 47