Table of Contents
Advertisement
Intel® Server Board S2600CW Family TPS
8.4
BIOS Recovery Jumper
When the BIOS Recovery jumper block is moved from its default pin position (pins 1-2), the
system will boot to the uEFI shell, where a standard BIOS update can be performed. See the
BIOS update instructions that are included with System Update Packages (SUP) downloaded
from Intel's download center web site. This jumper is used when the system BIOS has become
corrupted and is non-functional, requiring a new BIOS image to be loaded on to the server
board. The following procedure should be followed.
1. Turn off the system.
2. For safety, remove the AC power cords.
3. Remove the system top cover.
4. Move the "BIOS Recovery" jumper from the default operating position (covering pins 1 and
2) to the BIOS Recovery position (covering pins 2 and 3).
5. Reinstall the system top cover and reattach the AC power cords.
6. Power on the system.
7. The system will automatically boot to the EFI shell. Update the BIOS using the standard
BIOS update instructions provided with the system update package.
8. After the BIOS update has successfully completed, power off the system. For safety,
remove the AC power cords from the system.
9. Remove the system top cover.
10. Move the "BIOS Recovery" jumper back to the default operating position (covering pins 1
and 2).
11. Reinstall the system top cover and reattach the AC power cords.
12. Power on the system and access the <F2> BIOS Setup utility.
13. Configure desired BIOS settings.
14. Hit the <F10> key to save and exit the utility.
Revision 2.4
Intel® Server Board S2600CW Jumper Blocks
115
Advertisement
Table of Contents
