Figure 13. Bios Recovery Mode Jumper In Recovery Position - Intel X38ML User Manual

4. Insert the BIOS recovery media.
5. Plug in the AC power and power on the system.
The BIOS starts the recovery process by loading and booting to the recovery image
file. Then the BIOS POST screen appears and displays the progress.
6. Select to boot to the EFI SHELL.
7. Run Update.NSH. The system loads and executes the flash update application. A
message displays success or failure upon completion.
8. Power down the system and unplug the AC power cord.
9. Return the J1A2 BIOS Recovery Mode jumper to the default position, covering
pins 1 and 2.
10. Close the server chassis.
11. Reconnect the AC power and power up the server.
Intel® Server Board X38ML User Guide
BIOS
Default
Recovery
2
Mode
BIOS
Recovery
J1A2
3

Figure 13. BIOS Recovery Mode Jumper in Recovery Position

AF002608
21