Setting The Switching Delay (B.dly); Setting The Display Alignment (D.dir) - JUMO DELOS SI Operating Manual

7.14 Setting the switching delay (B.DLY)

Setting

7.15 Setting the display alignment (D.Dir)

Setting
Setting range:
Factory setting:
Unlock the instrument, See section 7.2 "Unlocking the instrument (code
entry)", page 27.
"Rotate" until the bottom line shows "B.DLY".
"Press"
Enter the value "digit by digit."
Setting range:
Factory setting:
Unlock the instrument, See section 7.2 "Unlocking the instrument (code
entry)", page 27.
"Rotate" until the bottom line shows "D.Dir".
"Press"
or
0.00 to 99.99 s
0.00 s
std = standard = instrument upright
turn = turned = instrument overhead
std
7 Commissioning
"0" flashes
Continuous
41