9 Setup program
9.2
Start the setup program
46
(2)
(a)
(1)
DC 24 V
Install the setup program software on the notebook / PC.
During the installation, the driver for the USB/TTL converter is also
installed on the PC.
Screw the connecting cable (b) onto the plug of the pressure switch (2).
Connect the USB/TTL converter (3) to the connecting cable (b) and PC
interface line (gray) (c).
Connect the PC interface line (gray) (c) to the notebook (4).
Connect the cable (a) to the power supply (1) and connecting
cable (b).
Start / Programs / JUMO instruments / Setup program JUMO DELOS K, SI,
(3)
(b)
(c)
(4)