Calibration; Setting The Zero Point (Offset) - JUMO DELOS SI Operating Manual

8 Calibration

8.1

Setting the zero point (offset)

8.1.1 Automatic offset adjustment
8.1.2 Edited offset setting
44
Automatic offset adjustment is only possible for instruments with a
relative pressure measuring range!
On the instrument
See section 7.5.1 "Automatic offset adjustment", page 31.
By setup program
not possible.
On the instrument
See section 7.5.2 "Edited offset setting", page 31.
By setup program
Connect the instrument with the PC and start the setup program,
See section 9 "Setup program", page 45 and following.
Input / offset.