Setup Program; Function - JUMO DELOS SI Operating Manual

9.1

Function

Configurable
parameters
Connection
The optionally available PC setup software (TN 20/00522384) can be used to
operate the instrument conveniently from a PC.
Depending on the device design, the following settings are possible, for
example:
- Measuring range and limits of measuring range.
- Response of outputs when the measuring range is exceeded.
- Functions of switching outputs K1 and K2.
- Setting special functions (for example tables for special linearizations).
Data can be transferred from or to the transmitter if it is connected
to the power supply; See section 4 "Electrical connection", page
11 and following.
(2)
(a)
(1)
DC 24 V
(1) Power supply DC 24 V
(2) Pressure switch type 405052
(3) USB/TTL converter
Part of TN 70/00456352
(4) Notebook / PC
(3)
(b)
(a) 4-pin cable socket (straight)
M12x1 with 2-m PVC cable
TN 40/00404585 or 4-pin angle
box M12x1 with 2-m PVC cable
TN 40/00409334
(b) Connecting cable
TN 70/00507861
(c) PC interface line (gray)
Part of (3)

9 Setup program

(c)
(4)
45