Commissioning; Getting Started - JUMO DELOS SI Operating Manual

7 Commissioning

7.1

Getting started

26
This is a suggestion for configuring the instrument reliably in little
time.
By checking the setting options of this list before starting the
configuration, you can avoid timeouts during the configuration.
Mounting the instrument, See section 5 "Mounting", page 14.
Installing the instrument, See section 4 "Electrical connection", page 11.
Unlocking the instrument, See section 7.2 "Unlocking the instrument (code
entry)", page 27.
Selecting the unit of the measured value, See section 7.4 "Selecting the unit
of the measured value (Uni.P)", page 28.
Adjusting the output signal, See section 7.7 "Setting the output signal
(S.TyP)", page 32.
Adjusting the scaling of the output signal (restricting the measuring range),
See section 7.8 "Setting scaling", page 33.
Setting the switching function, See section 7.10 "Setting the switching
function (B.Fct)", page 37.
Setting the switching point, See section 7.11 "Setting the switching point
(B.SP)", page 39.