Display And Operation - JUMO DELOS SI Operating Manual

Parameter
Switching delay
(for second switching
output only)

6.4.5 Display and operation

Parameter
Display position
Unit of actual value display
(for analog output only)
Version D
Version S
Code
(can only be edited via
setup program)
Display Setting range
0.00 ... 99.99 s
See section 7.10 "Setting the switching function
(B.Fct)", page 37.
Display Setting range
Normal (for normal operation)
Rotated (for overhead operation)
See section 7.15 "Setting the display alignment
(D.Dir)", page 41.
Pressure unit (see parameter "Uni.P")
Percentage of the scaled range
See section 7.16 "Setting the display unit (D.Uni)",
page 42.
Software version of the operating device
See section 7.17 "Displaying the version of the
operating device software (SW.Di)", page 43.
Software version of the signal stage
See section 7.18 "Displaying the version of the
signal stage software (SW.Si)", page 43.
0000 ... 0072 .... 9999
See section 7.2 "Unlocking the instrument (code
entry)", page 27.
6 Operation
1
1
25