7 Commissioning
7.3
Cancel operation
7.4
Selecting the unit of the measured value (Uni.P)
28
parameter level.
After an incorrect code is entered:
Press and hold the combination tool (2) longer than 3 seconds or
wait for timeout (no activity for longer than 60 seconds).
Unlock the instrument, See section 7.2 "Unlocking the instrument (code
entry)", page 27.
"Rotate" until the bottom line shows "Uni.P".
"Press"
The measured pressure is shown in millibar.
"Press"
The measured pressure is shown in bar.
Flashing
Continuous