Table of Contents
Advertisement
56
3. Repeat the previous step on the other chassis.
4. Lay the chassis flat and secure them with straps (or
other ways) to insure safety and damage free
transportation.
Connecting the chassis
1. Make sure the handle bar is secured at an upright
position (see Figure 47).
Place the back chassis vertically. Hold the front chassis
from the handle bar and bring it towards the back
chassis (see Figure 48).
Figure 47
2. Bring the two parts together. Use the hanging
hooks (see Figure 49) to locate the two ends
properly. At this point the central release button
will click.
OPERATING ATTO
Figure 48
Figure 49
Advertisement
Table of Contents
