Table of Contents
Advertisement
52
6. Using the main handle pull the center upwards and
towards the rod until it clicks and locks in place (see
Figure 39).
your finger between the chassis. This area is a pinch
point and requires your full attention.
7. Use the rod lever to adjust the height of the handle
bar to the lowest position and bring the lever back
to the secure position (see Figure 40).
Be careful not to pinch
Figure 39
8. Release the adjustment lever of the handle bar and
bring the handle bar to a horizontal position. Then
bring the lever back to secure position (see Figure
41).
OPERATING ATTO
Figure 40
Figure 41
Advertisement
Table of Contents
