Table of Contents
Advertisement
40
A. The On/Off button is located at the center of
the Driving Console below the display panel. To
turn ATTO on press and hold the button until
ATTO starts.
B. The two buttons on the sides of the ON/OFF
switch marked with "+" and "–" are your speed
limit control. Along with the number shown on
the display panel, they allow you to set the
maximum speed ATTO will develop at full
throttle. While ATTO is not moving, Click the
"+" button to increase the speed and the "-"
button to decrease the speed.
When driving in crowded places
and near obstacles, use extra care and reduce the
maximum speed to a limit allowing you to control
your mobility scooter without presenting a risk to
other people and to yourself.
Display panel
Figure 25 Display Panel
Battery level meter – When ATTO power is ON the
battery meter indicates the approximate battery charge
level. As with all Li-ion batteries, the charge level
indication is accurate only when the battery is fully
charged. All other indications are approximate and
intended to give you a rough idea of the battery charge
level. Please refer to the "Specification" chapter in this
Owner's Manual for more information on your battery
range.
Your scooter will automatically turn
itself off if the battery output falls below operation
voltage.
OPERATING ATTO
Advertisement
Table of Contents
