Table of Contents
Advertisement
OPERATING ATTO
Adjusting Driving Console angle
ATTO's Driving Console can be adjusted to your comfort
in a variety of angels. To adjust the Driving Console you
should first be seated on your mobility scooter:
1. Hold the Driving Console in one hand and release
the adjusting lever using the other hand (see Figure
19).
2. Adjust the Driving Console angel so you can reach
and hold it comfortably with a clear view of the
display area.
3. Tighten the adjustment lever when you are done.
Figure 19 Driving Console tilt lever
Seat height adjustment
height must be performed only by certified technician
to prevent injury and damage.
Although ATTO's seat is thin and stylish, it was designed
to provide comfort and safety and can be adjusted
according to user's preferences. The seat mechanism
can be locked at one of three fixed heights. To adjust
seat height please follow the following steps, no tools
needed:
1. ATTO has to be in opened position in order to
adjust seat height. Lift the seat to upright position,
locate the seat height adjustment cover at the seat
base right under the seat pivots and remove it (see
Figure 20).
37
Adjusting seat
Advertisement
Table of Contents
