Table of Contents
Advertisement
OPERATING ATTO
Direction mode – ATTO can drive both forward and
backward. The current driving direction is shown on the
display panel by an arrow pointing forward or
backward, depending on user's selection. To switch the
driving direction press on the direction button located
near the left hand grip.
Throttle
Figure 26 Driving Throttle
The throttle is used for driving and controlling the
driving speed. Place your thumb on the throttle lever
and press it down to accelerate. To decelerate, release
the throttle lever to your level of comfort. To bring the
scooter to a complete stop simply remove your thumb
from the lever which will set the lever to its "off"
position, bringing the scooter to a halt after 1.2 meter.
Reverse and horn buttons
Figure 27 Reverse and horn buttons
A. ATTO is equipped with a driving direction
button. Press on the button to change the
driving direction. Once the driving direction has
changed, ATTO will sound a single beep when in
forward driving mode, and a double beep when
in reverse driving mode. In addition, a large
arrow on the display panel will indicate the
current driving mode. When ATTO is turned on
it is always in Forward driving mode.
41
Advertisement
Table of Contents
