Table of Contents
Advertisement
34
10. Lock the rod in upright position by pushing the
front lever down until it clicks and locks in place
(see Figure 12). . In case the front lever require too
much force to operate, you should apply horizontal
pressure on the main handle towards the front of
the scooter. This will release the pressure on the
front lever and will make it easier to open.
11. Place one hand on the tiller and with the other
hand release the secure lever of the back handle
and bring the handle to upright position at 90
degrees (see Figure 13).
For proper operation please do not flip
the handle to 180 degrees from closed position. If you
Figure 12
did and you are unable to lift the chair backwards,
return the handle to its original position and try again.
OPERATING ATTO
Figure 13
Advertisement
Table of Contents
