Table of Contents
Advertisement
44
position and locked in place.
Turning ATTO on
Press and hold the "On" button to turn ATTO on. All
lights will come on momentarily and then the following
information will be indicated:
Set maximum speed
Forward driving direction (default)
Battery charge level status
See Figure 29 Typical display after turning on.
Figure 29 Typical display after turning on
We recommend that you select a maximum speed
setting (using the "+" and "-" buttons near the
On/Off switch) at which you feel comfortable, safe,
and in control of your scooter.
Make sure that you are seated safely and properly
on your ATTO.
For you first driving sessions, make sure that your
ATTO starts out on a level surface and that you will
continue driving on a level surface.
Never touch the Freewheel/brake release lever
while driving.
Do not bend, lean, or reach for objects if you have
to pick them up from the scooter deck or from
either side of the scooter.
Movements may change your center of gravity and
the weight distribution of the scooter and cause
your scooter to tip over, possibly resulting in
personal injury.
Never switch the scooter to the Freewheel mode
when somebody is sitting on it.
For proper operation, the Freewheel/brake release
lever should always be securely engaged.
Always bring your scooter to a complete stop
before stepping up or down from the scooter.
OPERATING ATTO
Advertisement
Table of Contents
