ATTO Technology MS01068 Owner's Manual page 44

OPERATING ATTO
away from metal parts and hold the grip and the
handlebar only in non-exposed areas covered with
plastic and rubber.
Getting on ATTO

Verify that the scooter is turned off.

Verify that the scooter is fully opened and secured.
See the "Opening" section of this Owner's Manual.

Carefully place one foot on the approximate center
of the deck and seat yourself comfortably and
securely on the seat.

Do not lean on the handlebar tiller
for support during stepping on or off the scooter. The
handlebar might unintentionally move and cause you to
lose your balance which could result in personal injury
Never step on or off the scooter
using the seat or the seat backrest for support. The seat
back may fold down and may cause you to lose your
balance, which could result in personal injury.
Getting off ATTO

Verify that the power is turned off.

Carefully place one foot on the ground, transfer
your weight to that leg, and slowly come to a
standing position.

Step away from the scooter.
Driving
INSPECTIONS PRIOR TO USING YOUR SCOOTER:
1. Please check that the battery is in its place and
verify it is locked and not protruding off the surface.
2. Please check that the battery is fully charged or has
enough capacity to carry you to your desired
destination.
3. Verify that the freewheel lever is in locked position.
4. Verify that all locking parts are in fully opened
43