Table of Contents
Advertisement
50
Folding (closing)
1. Make sure ATTO is on flat ground before folding it.
this chapter are done near and around pinching points.
Be careful and follow instructions to prevent injury.
Make sure your fingers are away from moving parts
that may be closing gaps while moving.
2. Fold both sides of the handle bar (see Figure 33).
3. Release the secure lever of the back handle and
bring the handle to 90 degrees position. Allow the
seat to slide down until it clicks in place (see Figure
34 & Figure 35).
Operations described in
Figure 33
4. Push the back of the chair forwards until it clicks
(see Figure 36).
OPERATING ATTO
Figure 34
Figure 35
Advertisement
Table of Contents
