GE 889 Instruction Manual page 85

CHAPTER 3: INTERFACES
NOTE:
NOTE
889 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUAL
Setpoints > Device > Front Panel > Default Screen (3-R1/R5)
Figure 3-8: Single Line Diagram example, see order code (3-R1/R5) for slot K
The breaker status color follows the Color Scheme setting (
> Display Properties > Color Scheme
the following logic.
Color Open Close
Scheme Color Color
Red
Green
The Unknown status has a white background with black text.
The parameters displayed in the Front panel screen example are as follows.
Parameter
Load Cur
Unbln
Volt (L-L)
Freq
V/ Hz
S:
P:
Q:
PF
). The breaker and generator status color is based on
SLD Breaker Symbol Color
Not
Unknown Disconnected Offline Online Tripped Unknown
Configured
Input for the value
Metering\ Generator\ General\ Load Current
Metering\ Generator\ General\ Unbalance Current
Metering\ Ph VT Bnk1-J2\ J2 V AVG L-L
Metering\ Frequency 1-J\ J2-3VT Frequency
Metering\ Volts per Hertz\ Volts Per Hertz 1
Metering\ Power 1\ Pwr1 Apparent
Metering\ Power 1\ Pwr1 Real
Metering\ Power 1\ Pwr1 Reactive
Metering\ Power 1\Pwr1 PF
FRONT CONTROL PANEL INTERFACE
Setpoints > Device > Front Panel
Generator Status
Red Green Orange White
Green Red Orange White
3–7