CHAPTER 3: INTERFACES
Connecting EnerVista 8 Series Setup software to the Relay
Using the Quick
Connect Feature
889 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUAL
The Quick Connect button can be used to establish a fast connection through the front
panel USB port of a relay, or through the Ethernet port. The following window appears
when the QuickConnect button is pressed:
As indicated by the window, the "Quick Connect" feature can quickly connect the software
to a front port if the USB is selected in the interface drop-down list. Select "USB" and press
the Connect button. Ethernet or WiFi can also be used as the interface for Quick Connect
as shown next.
SOFTWARE INTERFACE
3–21