Configurable Sld; Status Summary - GE 889 Instruction Manual

SUMMARY
Summary

Configurable SLD

5–2
The status of each SLD screen is displayed under Status > Summary > Configurable SLDs
> SLD1(X).
Figure 5-2: Sample SLD
Path:
Status > Summary > Configurable SLDs > SLD 1(X)
Once in the SLD screen, by default no breaker/switch is highlighted or selected. Pressing
the Up/Dn (or Up/Dn/Left/Right) navigation keys highlights BKR1 and navigates through
BKR1, 2, 3, etc. and then through Switch1, 2, 3, etc.
If the Up/Dn/Left/Right keys are used, the selection moves to the closest available breaker/
switch from the currently highlighted object. To select the breaker/switch, press the enter
key. Upon pressing the Enter key, the tab labels change to the programmable tab
pushbutton labels and a flash message for the breaker selected appears (Flash Message:
"BKR1 Selected"). Pressing Escape de-selects the breaker/switch and the tab pushbutton
labels.
889 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 5: STATUS