Regulatory Information; Important Safeguards; System Rating - Polycom RealPresence Immersive Studio User Manual

Regulatory Information

Regulatory notices describe safety and legal considerations for using the RealPresence Immersive Studio
system.

Important Safeguards

Read and understand the following instructions before using the system:
● Always disconnect the system from power before cleaning.
● Do not spray liquids directly onto the system when cleaning. Always apply the liquid first to a
static-free cloth.
● Do not place any liquids on the system.
● Do not disassemble this system. To reduce the risk of shock and to maintain the warranty on the
system, a qualified technician must perform service or repair work.
● Avoid using this system during an electrical storm. There may be a remote risk of electric shock from
lightning.

System Rating

120/220-240 V~,15/8 A, 50/60 Hz
Caution: Disconnect racks and lighting controller before servicing
This equipment uses multiple disconnects. See the instructions below for quick
disconnect of the racks and lighting controller. Please disconnect all before
servicing.
The main system consists of three independent electronics rack units which are considered "pluggable
equipment." The room lighting system is considered to be "permanently connected equipment."
In order for the pluggable equipment to be disconnected from the supply, the socket outlets shall be installed
near the equipment and shall be easily accessible.
● For each electronics rack, the electrical outlet is within 1 foot (30 cm) of the equipment.
● For each electronics rack, access to each power cord is easily accessible behind wooden panels. To
remove the wooden panels, lift up and towards you. The panels are located under each main display
(left, center, and right). No tools are required for the removal of the wooden panels.
To disconnect the room lighting from the AC mains supply, turn off the switch labeled (lighting disconnect).
Polycom, Inc.
SAVE THESE INSTRUCTIONS
20