Table of Contents
Advertisement
12 - SPARE PARTS
The spare parts indicated in Fig. 3, 4, 5 and 6 that is:
A: Pipetting pushbutton
B: Adjustment knob
C: Shaft
D: Ejector
F: Shaft nut
G: Piston assembly
H: Spacer
I: O-ring
J: Seal
K: Calibration key
L: Filter
M: Ejector cap
N: Ejector pushbutton
P: Locking ring
can be ordered from your Labnet representative (type of
pipette and name of the part for this pipette should be
specified).
Warning: The replacement of the piston requires con-
ducting of calibration procedure according to section 8.
Before returning a pipette to a Labnet representative
please ensure that the pipette is completely free of any
contamination (chemical, microbial or radioactive).
Contact Labnet at
+1
732-417-0700
fax:
+1
732-417-1750
email: labnet@labnetlink.com
All rights reserved. Product described in this manual is subject to availa-
bility and technical modification. Errors excepted.
PZ HTL S.A. reserves the right to improve, enhance or otherwise modify
its products without prior notification.
© 2010 PZ HTL S.A.
15
A1: Pushbutton
A2: Knob
BPP/04/2010
Hide quick links:
Advertisement
Table of Contents
