802.1X With Ead Assistant Configuration Example - HP FlexFabric 5700 Series Security Configuration Manual

# Verify that the user cannot ping the FTP server at any time from 8:00 to 18:00 on any weekday.
C:\>ping 10.0.0.1
Pinging 10.0.0.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 10.0.0.1:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
The output shows that ACL 3000 is active on the user, and the user cannot access the FTP server.

802.1X with EAD assistant configuration example

Network requirements
As shown in
The intranet 192.168.1.0/24 is attached to Ten-GigabitEthernet 1/0/1 of the access device.
•
The hosts use DHCP to obtain IP addresses.
•
• A DHCP server and a Web server are deployed on the 192.168.2.0/24 subnet for users to obtain
IP addresses and download client software.
Deploy an EAD solution for the intranet to meet the following requirements:
• Allow unauthenticated users and users who have failed 802.1X authentication to access
192.168.2.0/24. The users can obtain IP addresses and download software.
If these users use a Web browser to access a network other than 192.168.2.0/24, redirect them to
•
the Web server for 802.1X client downloading.
Allow authenticated 802.1X users to access the network.
•
Figure 33:
97