Sftp Configuration Examples; Password Authentication Enabled Sftp Server Configuration Example - HP FlexFabric 5700 Series Security Configuration Manual

# Create an SSH user client002. Specify the authentication method as publickey for the user.
Assign the public key switchkey to the user.
[SwitchB] ssh user client002 service-type stelnet authentication-type publickey
assign publickey switchkey
# Create a local device management user client002. Specify the service type as ssh for the user.
Assign the user role network-admin to the user.
[SwitchB] local-user client002 class manage
[SwitchB-luser-manage-client002] service-type ssh
[SwitchB-luser-manage-client002] authorization-attribute user-role network-admin
[SwitchB-luser-manage-client002] quit
3. Establish an SSH connection to the Stelnet server 192.168.1.40.
<SwitchA> ssh2 192.168.1.40
Username: client002
Press CTRL+C to abort.
Connecting to 192.168.1.40 port 22.
The server is not authenticated. Continue? [Y/N]:y
Do you want to save the server public key? [Y/N]:n
client002@192.168.1.40's password:
Enter a character ~ and a dot to abort.
******************************************************************************
* Copyright (c) 2010-2014 Hewlett-Packard Development Company,L.P.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
<SwitchB>
Select Yes to access the server and download the server's host public key. At the next connection
attempt, the client authenticates the server by using the saved server's host public key on the client.

SFTP configuration examples

Unless otherwise noted, devices in the configuration examples are in non-FIPS mode.
When you configure SFTP on a device that operates in FIPS mode, follow these restrictions and
guidelines:
The modulus length of the key pair must be 2048 bits.
•
When the device acts as an SFTP server, only RSA and ECDSA key pairs are supported.
•
Password authentication enabled SFTP server configuration
example
Network requirements
As shown in
You can log in to the switch through the SFTP client that runs on the host.
•
Figure 98:
331
*
*
*