Enabling The Session-Control Feature - HP FlexFabric 5700 Series Security Configuration Manual

Configuration procedure
To configure accounting methods for an ISP domain:
Step
1. Enter system view.
2. Enter ISP domain view.
3. Specify the default
accounting method for all
types of users.
4. Specify the command
accounting method.
5. Specify the accounting
method for LAN users.
6. Specify the accounting
method for login users.
7. Specify the accounting
method for portal users.

Enabling the session-control feature

A RADIUS server running on IMC can use session-control packets to inform disconnect or dynamic
authorization change requests. This task enables the device to receive RADIUS session-control packets on
UDP port 1812.
To enable the session-control feature:
Step
1. Enter system view.
2. Enable the session-control
feature.
Command
system-view
domain isp-name
accounting default { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
accounting command hwtacacs-scheme
hwtacacs-scheme-name
accounting lan-access { local [ none ] |
none | radius-scheme radius-scheme-name
[ local ] [ none ] }
accounting login { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
accounting portal { local [ none ] | none |
radius-scheme radius-scheme-name [ local ]
[ none ] }
Command
system-view
radius session-control enable
46
Remarks
N/A
N/A
By default, the accounting
method is local.
The none keyword is not
supported in FIPS mode.
By default, the default
accounting method is used
for command accounting.
By default, the default
accounting method is used
for LAN users.
The none keyword is not
supported in FIPS mode.
By default, the default
accounting method is used
for login users.
The none keyword is not
supported in FIPS mode.
By default, the default
accounting method is used
for portal users.
The none keyword is not
supported in FIPS mode.
Remarks
N/A
By default, the session-control
feature is disabled.